Dry ridge and dry verge in Scunthorpe

Dry ridge and dry verge in Scunthorpe

Dry ridge and dry verge in Scunthorpe. We survey the roof first, photograph what we find and give you an itemised written quote, so you know what you are paying for before anyone starts. Our Scunthorpe office covers Scunthorpe on 01724 706 781.

It covers the DN15, DN16 and DN17 postcode districts. Scunthorpe is in the middle of our Scunthorpe patch, covered by the Scunthorpe team on 01724 706 781, and the survey is free whether or not you go ahead with the work.

The roofs in Scunthorpe

Because Scunthorpe grew quickly through the twentieth century, whole streets went up together and their roofs are now ageing together. It is why a single estate can produce several re-roofs in a year and why neighbours often compare quotes. The pattern is consistent: sound covering, corroded fixings, perished underlay, and mortar bedded ridge and verge at the end of its service life.

Scunthorpe's housing is largely twentieth century, so a great many of its roofs are concrete interlocking tile laid on felt, all reaching the end of their fixings around the same time.

Dry ridge and verge suits Scunthorpe's exposed estate housing well. Mortar bedded ridge on an open plot works loose from both sides, and mechanical fixing removes the problem rather than resetting the clock on it.

Checking dry ridge and verge support in Scunthorpe's Lincoln Gardens

Lincoln Gardens and the streets around Jubilee Park contain twentieth century housing where concrete tiled roofs can have timber bargeboards beneath the gable edges. A Lincoln Gardens dry verge conversion needs to establish what lies behind that board, since the visible painted surface is not necessarily suitable structural support. Near Jubilee Park, shade on individual garden elevations can also keep a failing mortar edge damp longer after rain. For a Lincoln Gardens roof with repeated verge patching, the useful question is how far the supporting timber has deteriorated, not just how much mortar is missing from outside.

At a Lincoln Gardens gable, we remove enough existing bedding to inspect the ends of the roofing battens and their relationship to the bargeboard before committing to a dry verge system. For deficient Lincoln Gardens verge support, the normal sequence is to renew or extend suitable timber, confirm the tile overhang and install the specified verge fixings. Scaffold beside a Jubilee Park area house should allow the full gable to be reached without bearing on a conservatory below. If Lincoln Gardens dry ridge work is also proposed, we assess its batten fixing separately from the repaired gable edge.

On a Lincoln Gardens roof, reconstructing batten ends can extend an otherwise brief dry verge installation because secure support must precede the new edge covering. During the free survey near Jubilee Park, photographs of what we find reveal whether painted bargeboards conceal damaged timber. Conservatory protection, support renewal and tile compatibility are factors for the Lincoln Gardens property's itemised written quote. Once the dry verge beside Jubilee Park is fitted, keep vegetation away from the board beneath it and look from the garden for displaced units after windy weather, paying attention to the repaired support line.

What dry ridge and dry verge in Scunthorpe involves

• Dry ridge systemsOld ridge tiles lifted, mortar removed, ridge batten fixed and each tile screwed down with a ventilated union and seal.
• Storm reinstatementRidge and verge put back after wind damage, usually converted to dry fixing at the same time.
• Hip systemsDry hip rolls and hip irons where the roof has hips as well as a main ridge.

That is the short version. There is a fuller explanation of the work, the materials and the detailing on our dry ridge and dry verge page.

Signs your Scunthorpe property needs this

• Whistling or draught noise from the ridge in high wind
• A ridge tile that has moved out of line with the others
• Mortar fragments on the drive, path or in the gutter

Why mortar fails and dry fixing does not

Mortar is rigid and a roof is not. Timber moves with heat and moisture, the ridge tiles move with it, and eventually the bond breaks. Once one joint is open, water gets behind the bedding, frost does the rest, and the failure spreads along the ridge.

Dry ridge and dry verge in Scunthorpe at a glance

What affects the price in Scunthorpe

• Whether any tiles under the verge need replacing once the mortar is off
• Whether the existing ridge tiles can be re-used or need replacing
• The length of ridge, hips and verge in metres

Everything is priced after we have seen the roof, in writing, with the scope written down so there are no new numbers once work starts.